Reactors

Spec: 245X118X450mm(9.64”x4.6”x17.71”)
Capability:100G
Pump: ViaAqua2300 needle Wheel Pump
Power supply: AC110V/60Hz 25.5w

100% brand new and high quality

Material: Plastic

Color: Blue

Voltage: 220 V

Power cord length:Around 1.5M

 

Submersible motor, low noise, low power consumption.

Made of high-grade material, which is non-toxic, safe, wear-resisting, durable and friendly to the environment.

The use of plastic chip, wear to prevent, durable, energy efficient, full of power.

Suction cups can be a good fit in the glass surface, to help keep it stability.

No need any tools to detach it, easy to separate, easy to clean.

Suitable for aquarium, fountains, spout, fish tank, etc.

Package include:

JNS Fluidized Media Reactors are multi-purpose aquarium water filters specially designed for use in marine and reef aquaria. Insert your media of choice to help eliminate organic pollutants, odors, discolorations and algae fuels.

Fluidized reactors, also commonly referred to as phosphate or media reactors, are one of the easiest and most effective ways to use filter media in a saltwater aquarium system. These versatile filters are capable of running several different types of filter media, from activated carbon and granular ferrous oxide to resin and nitrate-reducing media.

The up-flow design of JNS Fluidized Media Reactors helps to keep filter media suspended and evenly dispersed to provide maximum contact time between your aquarium water and the media inside the reactor. Water is introduced into the bottom of the filter and then gravity pushes it upward through the media and back out into your tank.

JNS Fluidized Media Reactors are available in two sizes: 1E and 2E. They are computer designed, precision-cut and made of polished A-class acrylic. All JNS media reactors are rigorously tested in saltwater environments to ensure reliability, efficiency and affordability.

JNS Fluidized Media Reactors require a small pump/powerhead and tubing (sold separately) to push water through the reactor. You can plumb the reactor using 1/2" or 3/4" flexible vinyl tubing. Using a ball valve is highly recommended because it will allow you to regulate the flow rate. Since different types of media have different flow rate requirements, be sure to reference the manufacturer’s suggested flow rate for the media you intend to use (it’s usually listed in the product description and/or on the product label).

Features

• Reactor Footprint: 5.5" x 5.5"
• Chamber Diameter: 3.94"
• Reactor Height: 22"
• Chamber Capacity: 0.66 Gallons
• Using GFO: up to 500 Gallons
• Using Carbon: up to 300 Gallons
• Inlet/Outlet: 3/4" or 1/2" Hosebarb

JNS FR-SE External Media Reactor is a great multi-purpose aquarium water filters specially designed for use in smaller marine and reef aquaria. Insert your media of choice to help eliminate organic pollutants, odors, discolorations and algae fuels. Great for use with Carbon, GFO and even BioPellets!

The up-flow design of JNS FR-SE External Media Reactor helps to keep filter media suspended and evenly dispersed to provide maximum contact time between your aquarium water and the media inside the reactor. Water is introduced into the bottom of the filter and then pushed upward through the media and back out into your tank. An innovative bracket keeps the inlet and outlet tubes securely in place.

Made of high-quality acrylic components for precise fitment and excellent durability. Built-in hang-on bracket allows for easy installation.

Features

•     Chamber Diameter: 3.2"
•     Height: 14.6"
•     Minimum Tank Height: 12.5"
•     Accommodates aquarium rims up to 1"
•     Maximum Capacity: 1.0L (1000mL)
•     Using GFO: up to 150 gallons
•     Using Activate Carbon: up to 75 gallons
•     Using BioPellets: up to 50 gallons
•     Inlet/Outlet: 1/2" hosebarb
•     Recommended Flow Rate: up to 150GPH for carbon or GFO, up to 300GPH for BioPellets*

* flow rate must be adjusted based on the amount of media used. An adjustable pump or a valve is recommended.